Vibra-TITE 541 Green High Strength Slip Fit Anaerobic Retaining Compound, 1 liter Jug

Vibra-TITE 541 High Strength Retaining Compound is a single part, high viscosity, high strength anaerobic resin used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Vibra-TITE 541 can be used in a broad variety of applications such as Locks keys and splines, Eliminates backlash in worn assemblies, Locks bearings in place, preventing spin out, Bonds rotor to shaft in low horsepower motors, Locks bushings and sleeves in housings and on shafts, Restores the fit to worn assemblies or out-oftolerance parts. This high viscosity product is not recommended for extremely close or interference fits. For large gaps, use of Vibra-TITE primer to ensure a fast, full cure is advisable. Ensure parts are clean, dry and free from oil and grease before use. Product is normally hand applied from the bottle onto parts. Properties of uncured material are low toxicity, 100 percent solids, Viscosity at 25 degree C, cP Brookfield RVT, 1370 Spindle 3 at 20 rpm. 24 hrs at 72 degree F Full Cure Time. Static shear strength was measured on cylindrical parts with a 0.002” diametrical clearance. Product should be stored in a cool and dry location at temperatures between -10 degree C to 30 degree C. Optimal storage is 22 +/- 4 degree C. Shelf life is 18 months from date of manufacture when stored at 22 +/- 4 degree C. High Strength retaining compound recommended for diametral gap distances up to 0.015'' to augment slip-fits. For rotors, shafts, impellers and splines. 3000 Plus PSI Shear strength. 1.11 Specific gravity. T Suggested primer. 1 liter Jug.

• Increases the shear strength on non-threaded cylindrical metal assemblies
• Fills voids between close-fitting metal assemblies
• Creates a solid one-piece assembly
• Seals joints against leakage
• Prevents corrosion